hydraulicmanifolds.com.au

Hydraulic manifolds

A hydraulic manifold is a machined block that routes oil between pumps, valves and actuators, replacing a tangle of hoses and fittings. This page explains the main types and what to specify when ordering one.

This is a free, non-commercial reference page. It is general information only, not professional, legal or financial advice, and it does not rank or recommend any business. Listing in the directory is not an endorsement. Check current details with the official websites linked below.

The guide

The main things to understand.

What a manifold does

Drilled passages inside the block connect valves and ports, so the hydraulic circuit lives inside one compact unit with fewer hoses and potential leak points.

Cartridge valve manifolds

Screw-in cartridge valves fit into cavities machined into the block. They allow very compact, custom circuits.

Subplate and modular manifolds

Directional valves bolt onto the manifold face using standardised mounting patterns, making valves easy to swap and circuits easy to extend.

Materials

Aluminium suits lower pressures and weight-sensitive uses; steel and ductile iron suit higher pressures. The material must suit the system's pressure rating and environment.

Custom design

A manifold designer works from the hydraulic schematic, flow rates, pressures and space limits. Provide accurate specifications and ask for drawings to approve.

Testing and safety

Manifolds should be pressure-tested before use. Hydraulic systems store energy, and high-pressure fluid can cause serious injection injuries, so isolate and depressurise before any work.

Official and industry sources

Where to check the details.

Official and industry sources
NameLocationWebsiteNotes
Standards AustraliaNationalwww.standards.org.au
Safe Work AustraliaNationalwww.safeworkaustralia.gov.au
business.gov.auNationalbusiness.gov.au

Inclusion in this directory is not an endorsement. Links are to official websites as published at the time of checking.

Before you decide

Questions worth asking.

What are the flow and pressure requirements?
These drive the design and material.
Cartridge or subplate valves?
Each suits different needs for size and serviceability.
Can I approve drawings before machining?
Changes are easy on paper, costly in metal.
Is it pressure-tested and documented?
Ask for test records.

About this page

This page is a plain reference on hydraulic manifolds. It does not sell hydraulic components. Manufacturers wanting a correction can use the contact link below.